bluetooth bracelet fashion watch bluetooth phone bracelet

Bluetooth Version:V2.1

Voltage:3.6V-4.2V

Current:45mA

Frequency:2.4GHz

Charge time:2 hours

Standby time:72 hours

Battery:Lithium Polymer

Charger specification

Input Voltage:110~240V

Frequency:50Hz

Input current:0.15A

Output Voltage:5.7V

Output current:600mA

Safety guide:

·Don’t clean the bracelet with corrosiveness solvent.

·Don’t keep the bracelet in high temperature place.

·Don’t keep the bracelet in wet place.

·Don’t disassemble and assemble.

·Charge the bracelet with right way.

·Don’t put the bracelet into water.

Bluetooth Bracelet User Guide

Introduction

Thanks for you choice our Bluetooth bracelet firstly.

User guide include functions/operations/procedures, please read carefully to best use, and don’t damage the bracelet. Do not change the parts and disassemble and assemble,and not be guaranteed.

Package:bracelet,USB charger clip,charger,manual,warranty card.

Functions:

·vibrate when call come  

·call id

·prevent mobile lose  

·clock

User guide

1.sketch map(Picture 1)

2.Charge

·Bracelet bulid-in rechargeable lithium polymer battery,please charge 3 hours before first use.

·USB charge clip one port connect to USB charger port, clip connect with bracelet charger points, OLED screen will show charging sign.

3.Turn on/off

• Push button B 3s to turn on/off the bracelet.
• Screen show “power on” when turn on the bracelet.

· Screen show “power off” when turn off the bracelet.

4. Pairing

· Need to pair bracelet with mobile when use the bracelet first time.

• Push the button B 5s when bracelet is turn off, screen show “Pairing” .
• Turn on the mobile Bluetooth.
• Open the mobile Bluetooth search device function.
• Mobile will find out “bracelet”, choice this device and confirm connecting.
• Mobile ask pairing code, put into code “0000” to connect.
• Mobile ask confirmation, Push “OK” to connect.

· Bracelet screen show “” mean connect successful, bracelet will vibrate one time indicate pairing success.

5.Time adjust.

• Push button A 3s set up time when bracelet turn on.
• Screen show hour flash, Push button B to set up right time.;
• Short push button A to minute flash, push button B to set up right time,
• After finish setting up minute, Push button A to finish time adjusting.
• Push any buttons to light screen show clock time.

6.Vibrate when call come and show caller’s ID

• Bracelet will vibrate continue when mobile have call coming.
• Bracelet will show caller ID
• Vibrate will stop when use mobile take the call. Or reject the call.

· User can push the button B 3 times to reject the call .

7.Prevent mobile lose

• Bracelet will vibrate when the distance is more than 10m between the mobile with bracelet.
• The distance will be near on somewhere.
• Push any buttons to stop vibrate.

8.Disconnect and connect

• Bracelet will vibrate 3 times disconnect with mobile, interval time is 3s, and will connect with mobile initiative.
• Bracelet will connect mobile 10 minutes each time after first time connect initiative, if can’t connect success bracelet will vibrate one time until connect success or push button to stop connecting.

·Push button B to connect mobile initiative when bracelet is disconnect with mobile.

9.Bracelet reset

· User can charge the bracelet to reset when screen can’t not light, disconnect with mobile, etc.

1. Wear skill

• Keep the back of hand up, keep the opening of bracelet forward to the side of band.(Picture 2)
• Slide the bracelet to right place of hand.(Picture 3)

1. Service

• Warranty time is 1 year.